|
|
 |
Wing -
elevons hinged and pre-printed with the profile of
an F-15.
(They won't even let you fly
stand off scale with the thing but it sure makes it easier
to tell the top from the bottom in the air.) |
|
|
Fuselage
Installed on
wing and pre-drilled for vertical stabilizer and fuel tank
mount. |
|
|
Vertical Stab
(rudder hinged) |
|
|
Control horns and hardware
(two for pull-pull rudder
and two for elevons) |
|
|
Pushrod for throttle
(with clevises installed) |
|
|
Pushrods -
(2ea. for elevons, custom made, light weight, with clevis
installed) |
|
|
Nylon bolts (2ea.1/4x20x2 to attach vertical stab) |
|
|
Pull-Pull rudder linkage kit |
|
|
HD Double sided tape -
(to attach servos, fuel tank, and battery pack) |
|
|
Foam rubber pad
(to protect receiver) |
|
|
7 Nylon Tie Straps
(4ea. to firmly attach servos) |
|
|
11 Nylon Tie Straps
(3ea. to firmly attach fuel tank, battery, and receiver) |
|
|
Exhaust
Deflector - 6" neoprene tubing and
2 small tie straps to attach
(used to direct exhaust under wing) THE
PRINTED WING IS NOT FUEL PROOF |
|
|
4/40x1 machine screws w/nuts & locks
(4ea. engine mounting bolts) |
|
|
